Bridge Aging-Time - TP-Link TL-SG3109 Cli Reference Manual
Gigabit managed switch
Hide thumbs
Also See for TL-SG3109:
- User manual (234 pages) ,
- Cli reference manual (202 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
bridge aging-time
The bridge aging-time Global Configuration mode command sets the address table aging time. To restore the
default configuration, use the no form of this command.
Syntax
bridge aging-time seconds
no bridge aging-time
Parameters
•
seconds — Time in seconds. (Range: 10-630 seconds)
Default Configuration
The default setting is 300 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In this example the bridge aging time is set to 250.
Console(config)# bridge aging-time 250
Page 35
Advertisement
Table of Contents
