Configure Bridge Ont (Sfu) Multicast Service - TP-Link P1201-08 User Manual

OLT(config)# traffic-profile profile-id 1 profile-name 10M cir 10240 pir 10240 cbs 2000 pbs
2000
Configure ONT1 eth1 vlan mode is tag(access):
OLT(config)# interface gpon 0/0
OLT(config-interface-gpon-0/0)# ont port native-vlan 1 1 eth 1 vlan 100
OLT(config-interface-gpon-0/0)# exit
Config service port:
OLT(config)# service-port 3 vlan 100 gpon 0/0 port 1 ont 1 gemport 2 multi-service user-vlan
100 tag-action transparent inbound name 10M outbound name 10M
NOTE：
In this user manual service use single vlan. SVLAN is 100, USERVLAN is 100. Tag-action is
transparent. USERVLAN equal SVLAN. So the service-port transparent vlan 100. More Tag action
rule as follow:
TAG ACTION
DEFAULT
ADD_DOUBLE
TRANSPARENT
TRANSLATE
TRANSLATE_AND_A
DD

4.6.2 Configure Bridge ONT (SFU) Multicast Service

Premise Condition

OLT connect to uplink device and open service

OLT have created vlan for multicast service

OLT have configured GE port vlan

ONT have registered
Configure ONT1 multicast vlan mode is igmp-snooping-proxy, and multicast-forward is untag:
OLT(config)# ont-srvprofile gpon profile-id 0
OLT(config-ont-srvprofile-0)# multicast mode igmp-snooping-proxy
OLT(config-ont-srvprofile-0)# multicast-forward untag
OLT(config-ont-srvprofile-0)# exit
Configure ONT1 eth2 vlan mode is tag (access):
OLT(config)# interface gpon 0/0
OLT(config-interface-gpon-0/0)# ont port native-vlan 1 1 eth 2 vlan 200
Add a SVLAN to packet.
Add a SVLAN and a USERVLAN to packet.
When USERVLAN equal SVLAN would transparent packet.
Translate USERVLAN to SVLAN.
Add a SVLAN and translate USERVLAN to the new innervlan
11
Description