Sntp Unicast Client Enable - TP-Link TL-SG3109 Cli Reference Manual
Gigabit managed switch
Hide thumbs
Also See for TL-SG3109:
- User manual (234 pages) ,
- Cli reference manual (202 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command enables the device to use the Simple Net-
work Time Protocol (SNTP) to request and accept SNTP traffic from servers. To disable requesting and accepting
SNTP traffic from servers, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP servers.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept
SNTP traffic from servers.
Console(config)# sntp unicast client enable
Page 59
Advertisement
Table of Contents
