Traffic-Shape - TP-Link TL-SG3109 Cli Reference Manual

TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide

traffic-shape

Set shaper on egress port/queue. Use no form in order to disable the shaper.
traffic-shape { committed-rate } [queue-id]
no traffic-shape [queue-id]
Syntax
committed-rate – The average traffic rate (CIR) in bits per second(bps).
queue-id – [optional] Assign shaper to the specified queue.
no traffic-shape – disable the shaper on the interface, or use queue-id to disable the shaper on the specified
queue.
Command Mode
Interface configuration (Ethernet, Port-Channel).
Usage guidelines
Use this command in interface configuration mode to active shaper on egress port or egress queue.
For egress port, enter the interface configuration mode with the port number, and use traffic-shape without the
queue-id option; the CIRis applied on the specified port.
To activate shaper for specific queue, add the queue id to the line.
Default value
No shape is defined.
Page 165