Sntp Broadcast Client Enable - TP-Link TL-SG3109 Cli Reference Manual
Gigabit managed switch
Hide thumbs
Also See for TL-SG3109:
- User manual (234 pages) ,
- Cli reference manual (202 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables Simple Network Time Protocol
(SNTP) broadcast clients. To disable SNTP broadcast clients, use the no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp client enable (Interface) Interface Configuration mode command to enable the SNTP client on a
specific interface.
Examples
The following example enables the SNTP broadcast clients.
Console(config)# sntp broadcast client enable
Page 56
Advertisement
Table of Contents
