Ip Igmp Snooping Host-Time-Out - TP-Link TL-SG3109 Cli Reference Manual

Gigabit managed switch
Hide thumbs Also See for TL-SG3109:
Table of Contents

Advertisement

ip igmp snooping host-time-out

The ip igmp snooping host-time-out Interface Configuration (VLAN) mode command configures the host-time-
out. If an IGMP report for a multicast group was not received for a host-time-out period from a specific port, this
port is deleted from the member list of that multicast group. To return to the default configuration, use the no form
of this command.
Syntax
ip igmp snooping host-time-out time-out
no ip igmp snooping host-time-out
Parameters
time-out — Host timeout in seconds. (Range: 1 - 2147483647)
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router.
Example
The following example configures the host timeout to 300 seconds.
Console(config)# interface vlan 2
Console(config-if)# ip igmp snooping host-time-out 300
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 108

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-sl3452Tl-sl3428

Table of Contents