Table of Contents
Advertisement
4.3.3
Salt electrolysis cell for chlorine production 13 or 27 g/h (optional)
Connection cable
This equipment is intended for the production of chlorine from swimming pool water.
The salt electrolysis cell is provided as an option with the installation kit, it must be installed
bypass or online (max accepted flow rate of 18 m
It works with 3.5 g of salt per liter of water.
It must be supplied with low voltage by the box E-Box.
The cell has a built-in control panel.
Refer to the manual for this equipment for installation, adjustments and maintenance.
4.4
Tools Required for Installation
You will need the following tools in order to perform the installation in the best possible
conditions:
• A flat screwdriver set;
• A drill with adapted bits;
• A tape measure;
• One level;
• A compass.
Ref. SB-CU-IMP-062EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box MAESTRO - Installation
3
/h).
29 / 110
Advertisement
Table of Contents
