Pentair E-Box MAESTRO Installation And Operation Manual page 54

Installation and Operation Guide Version E-Box MAESTRO - Installation
Pool lighting independent connection
1. Connect the additional lighting according to the diagram below, terminal blocks 15-16.
2. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [ → Page 48], select the output AUX 4 "AUX" and customise the name if necessary.
Lighting will be active when scheduling or when the switch is operated through the
application.
Connection of an electric heater
1. Connect the heater according to the choice of the diagram below (greater than or less than
10 A).
2. In the menu "Pool Properties > Menu Installation 4X Extension", see Menu installation 4X
Extension [ → Page 48], select the output "Heater" and customise the name if necessary.
54 / 110 Ref. SB-CU-IMP-062EBA / A - 11.05.2023