Installation and Operation Guide Version E-Box MAESTRO - Installation
1. Unscrew the spigots.
Prohibition
Prohibition of pushing or pulling the cramps.
Risk of damage to probes.
2. Install the probes in the analysis chamber provided.
3. Connect the probes to the Probe Unit, see Probe Units Connections [
4. Do not lengthen the probe cables.
44 / 110
Screw/unscrew cylinders
Never push or pull the cylinders that have the cap
Ø10
Built-in flow sensor to be connected to input IN
(1 to 4) if desired or necessary.
Direction of water flow
Ref. SB-CU-IMP-062EBA / A - 11.05.2023
→
Page 46].