Installation and Operation Guide Version E-Box MAESTRO - Installation
4.11.5
PENTAIR SuperFlo VS
Info
Set the speeds V1 < V2 < V3 < V4 and V4 to 100% on the pump drive.
Place dip switches 1, 2, 3, 4 ON on the pump drive.
IN bypass connections
Not plugged in: For use with PENTAIR SuperFlo pump.
Connections on the 4 "Speed" connectors/PENTAIR SuperFlo installation:
• Frost free: Outlet used to trigger filtration for a water temperature < +3°C (modifiable).
• Eco Speed: Speed used when no preselected event (see relevant menu) is active.
• Normal speed: Speed used for the purposes of a preselected event (see relevant menu).
• Maximum speed: Speed used for backwashing or "shock" treatment (24 h of filtration and
electrolyser).
1. Connect through power – and + to the Speed FC BUS.
60 / 110
Ref. SB-CU-IMP-062EBA / A - 11.05.2023