Table of Contents
Advertisement
6
Operations
6.1
Commissioning
Turning on
When first starting up:
• the facade panels must be installed on the E-Box;
• the light on the front of the E-Box box must be illuminated, indicating the presence of voltage;
• the Control Centre must have its screen backlit and display information relating to the
various measurements of the pool water;
– if the Control Centre is stopped and then restarted, the 4X Extension light flashes for
30 seconds before turning on continuously.
6.2
Adding a Radio Relay and/or Inner Display
Info
The elements making up a set MAESTRO are paired in the factory by a unique radio code
that prevents any risk of interference with other MAESTRO (neighbourhood, several
nearby swimming pools...).
This RADIO mode allows you to add to an existing MAESTRO:
• a no. 2 Radio Relay in order to overcome difficult radio range situations (relief, very long
distances, etc.).
• an Inner Display no. 2 in order to take advantage of a second source of reading of the
information of your pool.
1. Press "reset" briefly (0.5 s).
Caution - material
Do not press for 4 s (until beep).
This would trigger a reset of the alarm values (risk of loss of information).
ð Radio mode is selected on the Inner Display:
Ref. SB-CU-IMP-062EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box MAESTRO - Operations
89 / 110
Advertisement
Table of Contents
