4.3
Salt amount definition
The salt settings are controlled through the controller programming. See Resin exchange capacity
and capacity of the unit [
4.4
Injector flow rates
The following graphics represent the injectors flow rate as a function of the inlet pressure for the
different injector sizes.
4.4.1
1600 injectors
Ref. MKT-IM-031 / D - 16.01.2023
→
Page 34].
INJECTOR 1
Inlet pressure [bar]
INJECTOR 2
Inlet pressure [bar]
Installer manual Fleck 2850 NXT/NXT2 - System sizing
Total
Rinse
Draw
Total
Rinse
Draw
39 / 174