Table of Contents
Advertisement
Installation and Operation Guide Version E-Box MAESTRO - Installation
4.3.2
Pool water treatment liquid solution injection metering pump
The solution injection metering pump is supplied with the installation kit, it must be installed
separately from the electrical box, integral with the wall of the technical room, in accordance with
its instructions.
When installing the peristaltic dosing pump, it is necessary to respect the direction of pumping of
the product therein and to respect a maximum product suction height of 1.5 m from the ground.
This equipment is designed to inject a water treatment product for swimming pools, in liquid form.
Metering Pump Kit Contents:
• 1 peristaltic pH pump, flow rate 1.5 l/h at 1.5 bar;
• required wall-mounting kit;
• 2 x 2 m injection tube;
• 1 injector with ½"adapter;
• 1 product suction strainer.
The connection of this equipment is carried out at the level of the box E-Box, as explained in detail
Connections [
→
Page 35].
28 / 110
Ref. SB-CU-IMP-062EBA / A - 11.05.2023
Advertisement
Table of Contents
