Table of Contents
Advertisement
Installation and Operation Guide Version E-Box MAESTRO - Installation
N-L1
E-Box Main Power Supply (230V)
1-2
Connection of the Heat Pump Power Supply (230V)
3-4
Variable Speed Pump Power Supply Connection (230V)
5-6
Pool Automatic Shutter Power Supply Connection (230V)
7-8
Connection of the Single Speed Filter Pump Power Supply (230V)
9-10
Connection of the Metering Pump Power Supply for pH control (230V)
11-12
Connection of the power supply for the metering pump for chlorine regulation or of the
power supply to the electrolyser (230 V)
13-14
AUX 3 Possibility of connecting an additional pump (booster, cascade, blower) under 230
V 10 A max. by setting the function on the website
15-16
AUX4 Possibility of connecting an additional accessory under 230 V 10 A max. by setting
the function on the website
17-18
AUX 5 Possibility of connecting an additional accessory (robot blower) under 230 V 10 A
max. by setting the function on the website (AUX5 also controls the "Robot" socket in
230 V on the side of the E-Box)
In order to operate the outputs correctly, it is necessary to configure them on the website.
These settings may be partly carried out on the interface of the MAESTRO, through the related
menus.
4.8.2.2
Terminal block 2: Low voltage connection (12-24 V)
19-20
Dry contact connection for lighting (same parameters as pool lighting function)
21-22
Dry contact for controlling the heating of the pool (through the flow switch of the heat
pump or the "Remote or Remote Control" contacts)
23-24
Control by the AUX 3 dry contact (same parameters as with the AUX 3 output in 230V
13/14)
25-26
Control by the AUX 4 dry contact (same parameters as with the AUX 4 output in 230V
15/16)
27-28
Control by the AUX 5 dry contact (same parameters as with the AUX 5 output in 230V
17/18, as well as with the side socket)
29-31-
Connection of the speed control common (see SPECK Eco Touch [
33-35
30
Speed 1
32
Speed 2
34
Speed 3
36
Speed 4
37-38
"Input 1" information input on the 4X Extension Unit module
39-40
"Input 2" information input on the 4X Extension Unit module
38 / 110
→
Page 58])
Ref. SB-CU-IMP-062EBA / A - 11.05.2023
Advertisement
Table of Contents
