Re-Learning The Original Inner Display - Pentair E-Box MAESTRO Installation And Operation Manual

New display no. 2
1. Remove the battery door.
2. Remove the insulating film from the batteries.
3. Inner Display no. 2 goes into radio learning mode.
4. Inner Display no. 2 displays the same values as Inner Display no. 1.
5. Replace the battery door.
Info
If the alarm values of display no. 1 have been customised, they must be reported on
display no. 2 to obtain identical alarm messages.
6.3

Re-learning the Original Inner Display

This RADIO mode makes it possible, in the event of loss or replacement of the original display, to
recognise it in the existing network MAESTRO.
1. Press "Radio Learning".
ð The orange LED lights up, the MAESTRO Probe Unit then emits a learning radio code
during 5 min.
ð Turning on the Inner Display triggers the recognition/machine learning of a radio code.
2. Remove the battery door.
3. Remove the insulating film from the batteries.
Ref. SB-CU-IMP-062EBA / A - 11.05.2023
Installation and Operation Guide Version E-Box MAESTRO - Operations
New Replacement Inner Display
91 / 110