Amf And Amf Plus Commands; Introduction - Allied Telesis IE220 Series Manual

46

Introduction

Overview This chapter provides an alphabetical reference for AMF and AMF Plus commands.
AMF is the Allied Telesis Autonomous Management Framework™, and AMF Plus is
an expanded version of AMF. Both AMF and AMF Plus are a suite of features that
combine to simplify network management across all supported network
equipment from the core to the edge. They also integrate with Vista Manager, our
graphical monitoring and management platform.
On the AlliedWare Plus command line, AMF and AMF Plus are identical. The
difference between them is in Vista Manager, where AMF Plus includes additional
AMF Plus intent-based networking features.
In the rest of this chapter, we use 'AMF' to refer to both AMF and AMF Plus.
AMF master Every AMF network must have at least one master node, which acts as the core of
nodes the AMF network. Not all AlliedWare Plus devices are capable of acting as a AMF
master. See the
about master support.
AMF edge AlliedWare Plus CentreCOM® Series switches can only be used as edge switches in
an AMF network. The full management power and convenience of AMF is available
on these switches, but they can only link to one other AMF node. They cannot form
cross-links or virtual links.
AMF naming When AMF is enabled on a device, it will automatically be assigned a host name. If
convention a host name has already been assigned, by using the command
238, this will remain. If however, no host name has been assigned, then the name
applied will be the prefix, host_ followed (without a space) by the MAC address of
the device. For example, a device whose MAC address is 0016.76b1.7a5e will have
the name host_0016_76b1_7a5e assigned to it.
To efficiently manage your network using AMF, we strongly advise that you devise
a naming convention for your network devices, and apply an appropriate
hostname to each device in your AMF network.
C613-50644-01 Rev B
AMF and AMF Plus
AMF Feature Overview and Configuration Guide
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Commands
hostname
for information
on page
1832