Pv-Scale - Scaling Of The Process Actual Value - EBRO ARMATUREN EP 501 C Operating Instructions Manual

23.2.2. PV-SCALE – Scaling of the process actual value
The following settings are specified in the submenu of PV-SCALE:
1. The physical unit of the process actual value.
PVmin
2. Position of the decimal point of the process actual value.
3. Lower scaling value of the process actual value.
Upper scaling value of the process actual value.
PVmax
K-factor for the flow sensor
K factor
The menu option is available only for the frequency signal type (PV-INPUT → Frequency).
Operating structure:
PV SCALE ENTER
* If the submenu is left by pressing the left selection key
Figure 27: Operating structure PV-SCALE
70
In PVmin the unit of the process actual value and the position of the decimal point are
specified for all scaling values (SPmin, SPmax, PVmin, PVmax).
PVmin
PVmax
Only.for.frequency.signal.type (PV-INPUT.→.Frequency)
K factor
EXIT
english
INPUT
Select physical unit
Specify position of the decimal
point for all scaling values
Specify lower scaling value
INPUT
Specify upper scaling value
INPUT VALUE
Press for
approx. 5 s
TEACH-IN
EXIT
ESC
, the value remains unchanged.
Typ EP 501
Start-Up
INPUT
Enter
K-factor
ENTER
TEACH-IN
START
EXIT
Valve is being
closed
Container
is being filled
–> filling ...
Volume is
displayed
*
OK
*
OK
*
OK
START
STOP
OK