Typ EP 501
Description of System
11.
TECHNICAL DATA
11.1.
Conformity
The device conforms with the EU Directives according to the EU Declaration of Conformity.
11.2.
Standards
The applied standards, which verify conformity with the EU Directives, can be found on the EU-Type Examination
Certificate and / or the EU Declaration of Conformity.
11.3.
Operating conditions
NOTE!
If.used.outside,.the.device.may.be.exposed.to.direct.sunlight.and.temperature.fluctuations.which.may.
cause.malfunctions.or.leaks.
• If the device is used outdoors, do not expose it unprotected to the weather conditions.
• Ensure that the permitted ambient temperature does not exceed the maximum value or drop below the minimum value.
Environmental temperature
Degree of protection
11.4.
Rating plate and additional plate for Ex devices
Explanation.of.the.device-specific.specifications.on.the.rating.plate:
Example:
Figure 8:
Example of rating plate
The permitted temperature range is given on the type label of the device.
IP 65 / IP 67* according to EN 60529
(only if cables, plugs and sockets have been connected correctly)
* If the device is used under IP 67 conditions, the ventilation filter (see
"Figure 1: Structure, Type EP 501" must be removed and the exhaust air
conducted into the dry area.
Type
EP 501
24V DC
IP65 / IP67
P = 1,4 ... 7 bar
Tamb -10 ... +60°C
S/N 1055
00211958
Identification number
Serial number
Operating voltage
Degree of protection
Pressure range
Ambient temperature
W18ML
english
27