Simulation - Menu For Simulation Of Set-Point Value, Process And Process Valve - EBRO ARMATUREN EP 501 C Operating Instructions Manual

Typ EP 501
Auxiliary functions
24.2.21. SIMULATION – Menu for simulation of set-point value,
process and process valve
This function can be used to simulate set-point value, process and process valve independently of each other.
Caution! Restarting the device deactivates the simulation.
The settings of SIGNAL.form, x.SIM and p.SIM are reset to the factory setting.
SIMULATION ENTER
EXIT
*.If the submenu is left by pressing the
Figure 72: Operating structure SIMULATION
Simulation.of.set-point.value
SIGNAL.sim ENTER
EXIT
Simulation.of.process.and.process.valve
CONTROL.sim
ENTER
EXIT
ESC . key, the value remains unchanged.
SIGNAL.form ENTER
EXIT
INPUT
Offset
Input
value
Amplitude INPUT
Input
value
INPUT
Period
Input
value
SELEC
Process valve is simulated
x.SIM
Process is simulated
p.SIM
Input amplification factor
SIM.Gain INPUT
Input
value
Input time constant
INPUT
SIM.Delay
Input
value
english
SELEC
Simulation
Externally
of set-
point value
inactive
Select waveform
Sine
Sine
Square
Square
Triangle
Triangle
*
OK
*
OK
*
OK
*
OK
*
OK
125