Input.-.Setting.the.input.signal - EBRO ARMATUREN EP 501 C Operating Instructions Manual

21.1. INPUT - Setting the input signal
This setting is used to select the input signal for the set-point value.
Procedure:
Key Action
MENU Press
Select INPUT
/
ENTER
Press
/ Select input signal
(4-20 mA, 0-20 mA,....)
SELEC
Press
EXIT Press
EXIT Press
Table 25: Setting the input signal
Operating structure:
Process.level (values are displayed)
Press for approx. 3 s
MENU
Setting.level
Figure 23: Operating structure INPUT
62
Description
Switching from process level
for approx. 3 s
The possible input signals for INPUT are displayed.
The selected input signal is now marked by a filled circle
Return to the main menu (MAIN).
Switching from setting level
INPUT
X.TUNE
ADD.FUNCTION
EXIT
english
Typ EP 501
Start-Up
setting level.
process level.
Select the input signal
4-20 mA
ENTER
0-20 mA
0-10 V
0-5 V
.
SELEC
EXIT