26.
DESCRIPTION OF THE PROFIBUS DP
26.1.
Technical data
The protocol sequence complies with the standard DIN 19245 Part 3.
GSD.file
Bitmap.files
PNO-ID.
Baud.rate
Sync.and.Freeze.mode Are not supported
Diagnosis.telegram
Parameter.telegram
The process data is configured in the device and in the PROFIBUS master.
Maximum 10 process values (total INPUT and OUTPUT) can be transferred.
26.2.
Interfaces
Bus
Binary input
24 V DC
Figure 106:
Interfaces PROFIBUS DP
172
BUER0C1E.gsd
BUER0C1E.bmp
0C1E Hex
Max. 12 mbaud
(is automatically set by the device)
No device-specific diagnosis
No user parameters
Type.EP.501
PROFIBUS DP
english
Bus
Operation
Typ EP 501
PROFIBUS DP