General.information; General.information; Scope.of.supply; Contact.address - EBRO ARMATUREN EP 501 C Operating Instructions Manual

Electropneumatic positioner and process controller
Table of Contents

Advertisement

5.
GENERAL INFORMATION
5.1.
Scope of supply
In general it consists of the device and the associated operating instructions.
We will provide you with attachment kit for rotary actuators as accessory.
If there are any discrepancies, please contact us immediately.
5.2.
Contact address
Germany
EBRO ARMATUREN Gebr. Bröer GmbH
Karlstraße 8
D-58135 Hagen
Tel. + 49 (0) 2331 - 904 0
Fax + 49 (0) 2331 - 904 111
E-mail: post@ebro-armaturen.com
International
The international contact addresses can be found on the internet at:
5.3.

Warranty

The warranty is only valid if the device is used as intended in accordance with the specified application conditions.
5.4.
Master code
Operation of the device can be locked via a freely selectable user code. In addition, there is a non-changeable master
code with which you can perform all operator actions on the device. This 4-digit master code can be found on the
last pages of the printed brief instructions which are enclosed with each device.
If required, cut out the code and keep it separate from these operating instructions.
10
english
Typ EP 501
General information
Safety instructions
www.ebro-armaturen.com

Advertisement

Table of Contents
loading

Related Products for EBRO ARMATUREN EP 501 C

This manual is also suitable for:

Ep 501Ep 501 l

Table of Contents