Output - Configuring The Outputs (Option) - EBRO ARMATUREN EP 501 C Operating Instructions Manual

24.2.14. OUTPUT – Configuring the outputs (option)
The OUTPUT menu option is only indicated in the selection menu of ADD.FUNCTION if the device has
outputs (option).
The.device.which.has.the.outputs.option.is.available.in.the.following.versions:
• one analogue output
• one analogue and two binary outputs
• two binary outputs
According to the version of the device only the possible adjustable outputs (ANALOGUE,
ANALOGUE + BIN 1 + BIN 2 or BIN 1 + BIN 2) are indicated in the OUTPUT menu option.
OUTPUT
Figure 64: Operating structure OUTPUT;
24.2.14.1. OUT ANALOG - Configuring the analogue output
Type.EP.501: The feedback of the current position (POS) or of the set-point value (CMD) can be transmitted to the
control center via the analog output.
Type.EP.501.C: The feedback of the current position (POS) or of the set-point value (CMD), of the process actual
value (PV) or of the process set-point value (SP) can be transmitted to the control center via the
analog output.
OUT ANALOG
108
Figure 65: Operating structure OUTPUT-ANALOG;
OUT ANALOG
ENTER
OUT BIN1
OUT BIN2
EXIT
ENTER
POS
CMD
For.Type.EP.501.C.only.(process control):.
PV
SP
OUT type
EXIT
english
Typ EP 501
Auxiliary functions
Configuration of the analogue output
ENTER
Configuration of the binary output 1
ENTER
Configuration of the binary output 2
ENTER
SELEC
Output of actual position
Output of set-point position
Output of the process actual value
Output of the process set-point value
4 - 20 mA
ENTER
0 - 20 mA
0 - 10 V
0 - 5 V
EXIT
SELEC
Selection of the
standard signal