Bus.comm - Settings.on.type.ep.501 - EBRO ARMATUREN EP 501 C Operating Instructions Manual

28.3. BUS.COMM – Settings on Type EP 501
Set the following menu options in the BUS.COMM menu for start-up of the PROFIBUS DP:
Enter.a.device.address.(value between 0 and 126)
Address 0
Activate.or.deactivate.approach.of.the.safety.position
BUS FAIL
Selection SafePos off
Selection SafePos on
SAFEPOS activated:
SAFEPOS deactivated:
Procedure:
Key Action
MENU
Press
Select BUS.COMM
/
ENTER
Press
Setting.device.address
/ Select Address
INPUT
Press
/
OK
Press
Deactivating./.activating.safety.position
/ Select BUS FAIL
ENTER
Press
/ Select menu option
SELEC Press
EXIT Press
EXIT Press
EXIT Press
Table 96: BUS.COMM; settings
178
– The actuator remains in the position which corresponds to the set-point value last
transferred (default setting).
–.. I f there is a fault in the bus communication, the behavior of the actuator depends on
the activation of the SAFEPOS auxiliary function. See Chapter "24.2.11. SAFEPOS
– Input the safety position".
The actuator moves to the safety position which is specified in the SAFEPOS aux-
iliary function.
The actuator moves to the safety end position which it would assume if the elec-
trical and pneumatic auxiliary power failed. See Chapter "11.8. Safety end positions
after failure of the electrical or pneumatic auxiliary power".
Description
Switching from process level
for approx. 3 s
Selection in the main menu (MAIN).
The submenu options for basic settings can now be selected.
The input screen is opened.
Enter a device address (value between 0 and 126).
Increase value
Reduce value
Return to BUS.COMM.
The menu options for deactivating and activating the safety position
are displayed.
The selection is now marked by a filled circle
Return to BUS.COMM.
Return to the main menu (MAIN).
Switching from setting level
english
SafePos off
= deactivated
SafePos on
= activated
Typ EP 501
PROFIBUS DP
setting level.
.
process level.