Authorized.use; Authorized.use; Restrictions - EBRO ARMATUREN EP 501 C Operating Instructions Manual

Electropneumatic positioner and process controller
Table of Contents

Advertisement

Typ EP 501
General information
Safety instructions
2.
AUTHORIZED USE
Incorrect.use.of.the.device.can.be.dangerous.to.people,.nearby.equipment.and.the.environment..
The device is designed for the open-loop control and closed-loop control of media.
▶ If using the device in the potentially explosive area, observe the specifications on the additional plate for Ex
devices.
▶ Devices which do not have an additional plate for Ex devices must not be used in the potentially explosive
area.
▶ The device must not be exposed to direct sunlight.
▶ Pulsating direct voltage (rectified alternating voltage without smoothing) must not be used as operating
voltage.
▶ During use observe the permitted data, the operating conditions and conditions of use specified in the con-
tract documents and operating instructions, as described in chapter "Description of System" - "11. Technical
data" in this manual and in the valve manual for the respective pneumatically actuated valve.
▶ The device may be used only in conjunction with third-party devices and components recommended and
authorised by EBRO.
▶ In view of the wide range of possible application cases, check whether the device is suitable for the specific
application case and check this out if required.
▶ Correct transportation, correct storage and installation and careful use and maintenance are essential for reli-
able and faultless operation.
▶ Use the Type device only as intended.
2.1.

Restrictions

If exporting the system/device, observe any existing restrictions.
english
7

Advertisement

Table of Contents
loading

Related Products for EBRO ARMATUREN EP 501 C

This manual is also suitable for:

Ep 501Ep 501 l

Table of Contents