Operating.levels; Operating.levels; Switching.between.the.operating.levels - EBRO ARMATUREN EP 501 C Operating Instructions Manual

15. OPERATING LEVELS
There is the process level and the setting level for the operation and setting of Type EP 501 / EP 501 C.
Process.level:.
The running process is displayed and operated on the process level.
Operating state:
Setting.level:.
The basic settings for the process are made on the setting level.
If the device is in the AUTOMATIC operating state when changing to the setting level, the process continues
running during the setting.
15.1. Switching between the operating levels
Change to the setting level
Return to the process level
The set MANUAL or AUTOMATIC operating state is retained even when the operating level is changed.
Change to the setting level
Left selection key
Press for 3 seconds
Figure 18: Changing operating level
46
AUTOMATIC – Displaying the process data
MANUAL – Manually opening and closing the valve
– Inputting the operating parameters
– Activating auxiliary functions
Progress bar
closes
english
Typ EP 501
Operation
Press for 3 seconds
MENU
Press briefly
EXIT
Return to the process level
Left selection key
Press