Set.factory - Resetting To The Factory Settings - EBRO ARMATUREN EP 501 C Operating Instructions Manual

Typ EP 501
Auxiliary functions
24.2.16. SET.FACTORY – Resetting to the factory settings
This function allows all settings implemented by the user to be reset to the delivery status.
All EEPROM parameters with the exception of the calibration values are reset to default values. Then a hardware
reset is implemented.
SET.FACTORY
Figure 68: Operating structure SET.FACTORY
Resetting.to.the.factory.settings:
Key Action
MENU Press for approx. 3 s
/ Select SET.FACTORY
RUN
Press for approx. 3 s
(until progress bar is closed)
EXIT Press
Table 59: SET.FACTORY; Resetting to the factory settings
To adjust the device to the operating parameters, re-implement self-parameterization of the positioner
(X.TUNE).
Hold down as long as countdown
(5 ...) is running
RUN
Description
Switching from process level
(To do this, the auxiliary function must be incorporated into the main
menu).
"factory reset" is shown.
Reset is implemented.
Switching from setting level
factory
reset
setting level.
process level.
english
119