Attachment.and.assembly; Attachment.and.assembly; Safety.instructions; Attachment.to.a.continuous.valve.with.rotary.actuator - EBRO ARMATUREN EP 501 C Operating Instructions Manual

12. ATTACHMENT AND ASSEMBLY
The dimensions of the device and the different device versions can be found on the data sheet.
12.1. Safety instructions:
WARNING!
Risk.of.injury.from.improper.installation.
▶ Installation may be carried out by authorised technicians only and with the appropriate tools.
Risk.of.injury.from.unintentional.activation.of.the.system.and.an.uncontrolled.restart.
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.
12.2. Attachment to a continuous valve with rotary
actuator
The shaft of the position sensor integrated in the positioner is connected directly to the shaft of the rotary
actuator.

12.2.1. Installation

WARNING!
Risk.of.injury.from.improper.installation.
▶ Installation may be carried out by authorised technicians only and with the appropriate tools.
Risk.of.injury.from.unintentional.activation.of.the.system.and.an.uncontrolled.restart.
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.
Procedure:
→
Specify the attachment position of the device:
- parallel to the actuator or
- rotated by 90° to the actuator.
→
Determine home position and direction of rotation of the actuator.
→
Connect adapter to the shaft of the device and secure with 2 setscrews.
34
Typ EP 501
Installation