Activation.of.the.process.controller; Activation.of.the.process.controller - EBRO ARMATUREN EP 501 C Operating Instructions Manual

22. ACTIVATION OF THE PROCESS
CONTROLLER
The process controller is activated by selecting the P.CONTROL auxiliary function in the ADD.FUNCTION menu.
The activation transfers P.CONTROL into the main menu (MAIN) where it is available for further settings.
Procedure:
Key Action
MENU Press
/ Select ADD.FUNCTION
ENTER
Press
/ Select P.CONTROL
ENTER Press
EXIT Press
Table 28: Activating auxiliary functions
Following activation of P.CONTROL, the P.Q'LIN and P.TUNE menus are also available in the main menu
(MAIN). They offer support for the setting of the process control.
P.Q'LIN Linearization of the process characteristic
Description see Chapter "23.4"
P.TUNE Self-optimization of the process controller (process tune)
Description see Chapter "23.5"
ADD.FUNCTION – Add.auxiliary.functions
Apart from activating the process controller, ADD.FUNCTION can be used to activate auxiliary functions and
incorporate them into the main menu.
The description can be found in Chapter "24. Configuring the auxiliary functions".
66
Description
Switching from process level
for approx. 3 s
The possible auxiliary functions are displayed.
P.CONTROL is now marked by a cross
Acknowledgment and simultaneous return to the main menu (MAIN).
P.CONTROL is now activated and incorporated into the main menu.
english
Typ EP 501
Start-Up
setting level.
.