Amax-5001 Application; Amax-5001 Specification - Advantech AMAX-5000 Series User Manual

3.1.1

AMAX-5001 Application

AMAX-5000 controller doesn't provide power for the right side I/O modules of the
controller. This design will avoid damaging the entire system when a huge voltage/
current flows into the controller or modules.
AMAX-5001 must be the first module on the right side of AMAX-5000 series control-
ler. It provides maximum of 2A to the other modules on EtherCAT bus. But it does'nt
provide power for the left side of the AMAX-5001 module, only for the right side mod-
ules. For more about the EtherCAT bus application and design please refer to the
below figure.
3.1.2

AMAX-5001 Specification

3.1.2.1 General
Certification: CE, FCC class A

Connector: Pluggable 4P+8P push-in terminal (#24~16 AWG)

Module Enclosure: Polycarbonate

Power Consumption: 2W @ 24V

Protocol: EtherCAT

Transmission Rate: 100Mbps

Distributed Clock: Default not supported

LED Indicator: PWR, RUN, Power diagnosis LED

Weight: Approx. 80g

3.1.2.2 Power Input
Rated Voltage: 24V

Dual Power Input: Supported

Max Current on Bus: 2A

Diagnosis Function:

– Over/under voltage for input 1&2
– Over current output on bus
Figure 3.2 AMAX-5001 Application
DC
(±20%)
DC
19 AMAX-5000 Series User Manual