Mircom FR-320 Series Installation And Operation Manual page 9

• Subsequent Alarm, Supervisory, and Trouble operation.
• Non-resettable auxiliary power supply, 300mA max.
• Four wire resettable smoke power supply, 100mA max.
• Relay Contacts for Common Alarm, Common Supervisory, Common Trouble, and
Auxiliary Alarm Relay (disconnectable).
• RS-485 Interface for RA-1000 Series Remote Multiplex Annunciators and Smart relay
Module.
• Optional Modules for additional Relay Circuits.
• Extensive transient protection.
• Easy configuration of the panel using LCD service tool (CFG-300).
• Releasing circuit protection from false alarm by disconnecting the battery if the voltage
falls below 20.4V at the last releasing device.
• Wide range of compatible solenoids (see Appendix A: Compatible Solenoids).
• 14 pre-programmed modes.
9