Set Password (Command-Menu); View Event Log (Command-Menu) - Mircom FR-320 Series Installation And Operation Manual

9.7

3. Set Password (Command-Menu)

i
Note:
!
Attention: Mircom recommends that you change the passwords from the defaults,
First choose the level of password to be changed
Select Access Level
0
Then
Enter new passcode:
Re-enter new passcode:
If the passcode does not match, the following message
appears and the system exit to the main menu
Invalid passcode
If the passcode is OK the following message appears and
exits to the main menu
Passcode updated
The user can change the password only for the current access level as well as any lower
levels.
9.8

4. View Event Log (Command-Menu)

The event log looks the same as the normal event queue. Pressing the "INFO" key has the
same effect that it does in the event queue. The illustration below provides an example of how
54
Refer to How to Use the Keypad to Program the FR-320 on page 45 for detailed
instructions on making menu selections.
write them down, and store them in a safe place. If you lose the
passwords, you will not be able to access the logs.
Use this function to change the pass-
code. The minimum number of digits is 4
0 -> Default
and the maximum is 10. Only numeric
digits are allowed.