BASIC PROCEDURE FOR
5
TRANSMISSION IN INTERNET FAX MODE
SENDING A FAX IN INTERNET FAX MODE
When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be
changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the
[Cancel] key in the touch panel and follow the steps below.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (
If placed in landscape (horizontal) orientation (
size original, enter the original size manually.
1
• Image rotation
8-1/2" x 11" and 5-1/2" x 8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in
8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. (8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5)
originals cannot be rotated for transmission.)
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The default setting is: rotate 8-1/2" x 11" (A4) to 8-1/2" x 11"R (A4R), and 5-1/2" x 8-1/2"R (B5R or A5R) to
5-1/2" x 8-1/2" (B5 or A5).
Mode Switch
Image
Internet Fax
Settings
Send Settings
2
USB Mem. Scan
(1)
Original size
detector
Scan
Fax
PC Scan
Data Entry
(2)
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
), an incorrect size will be detected. For an 5-1/2" x 8-1/2"R (A5R)
Transmission
Change to Internet fax mode.
Address Book
(1) Touch the [Mode Switch] key.
Address Entry
Special Modes
(2) Touch the [Internet Fax] key.
File
Quick File
62
).