Sending An Image; Basic Transmission Procedure - Sharp MX-B350W User Manual

SCANNER►SCANNER SEQUENCE

SENDING AN IMAGE

BASIC TRANSMISSION PROCEDURE

Scanner transmission job cannot be accepted while printing a fax receiving data. Start scanning after the fax data printing is
finished.
Using the document feeder
Make sure the machine is in scan mode.
1
When the SCAN indicator is lit, the machine is in scan mode. If the indicator is not lit, press the [SCAN] key.
If auditing mode has been enabled for the scan function in the system settings, a message will appear prompting you to
enter your account number when you switch to scan mode. Enter your account number (five digits) with the numeric
keys.
► User Authentication (page 7-12)
2
Check the original size.
3
To change the original size, change as explained in
If needed, select the resolution setting.
4
► SELECTING THE RESOLUTION (page 5-12)
The initial factory setting is [200dpi].
If needed, select the format.
5
► SELECTING THE FILE FORMAT (page 5-13)
The initial factory setting
• Color / Grayscale :
• B/W :
If you select "B/W", adjust the exposure in B/W mode if needed.
6
► SELECTING THE COLOR MODE (page 5-13)
Press the [ADDRESS] key.
7
STORING SCANNING SETTINGS (page
PDF M
PDF G4
5-5
Place the original(s).
Place the original in the document feeder tray of the
automatic document feeder.
► AUTOMATIC DOCUMENT FEEDER (page 1-30)
5-11).