Enter The Address Manually - Sharp MX-2300N User Manual

ENTER THE ADDRESS MANUALLY

Destination addresses for Scan to E-mail and Internet fax can be entered manually.
Mode Switch
Image
Internet Fax
Settings
Send Settings
1
USB Mem. Scan
(1)
Ready to send.
Scan Scan
Mode Switch
8 x11 1 / 2
Image
2
Settings
Send Settings
Select addressee type.
To
3
• If you wish the destination to be a Cc destination, touch the [Cc] key.
• The [Bcc] key only appears when Bcc has been enabled using "Bcc Setting" in the system settings (administrator).
If you wish the destination to be a Bcc destination, touch the [Bcc] key.
• When Internet fax mode is selected, you will return to the base screen after entering the destination address;
however, if "I-fax Reception Report On/Off Setting" is enabled in the system settings (administrator), the I-fax
reception report settings screen will appear. If you wish to receive a report, touch the [Yes] key. If not, touch the [No]
key.
• System Settings (Administrator): I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent. When the destination is specified by directly
entering the address, a message will appear asking you if you wish to receive a report.
• System Settings (Administrator): Bcc Setting
This setting enables or disables Bcc delivery. When enabled, the [Bcc] key appears in the Address Book screen and the
delivery type selection screen.
Scan Fax
PC Scan Data Entry
(2)
Send
Auto
Cc Bcc
Change the mode.
Address Book
(1) Touch the [Mode Switch] key.
Address Entry
Special Modes
(2) Touch the key of the mode that you wish to
File
use.
Quick File
Touch the [Address Entry] key.
Resend
Address Book
Address Entry
Special Modes
File
Quick File
Enter the destination address.
(1) If scan mode is selected, select the type of
delivery.
Normally the [To] key is touched. This specifies the e-mail
address that will be entered as the recipient.
(2) Enter the destination address on the text
entry screen that will appear.
Enter the destination address and touch the [OK] key in
the text entry screen.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
23