Automatically Scanning Both Sides Of An Original (2-Sided Original) - Sharp MX-2300N User Manual

AUTOMATICALLY SCANNING BOTH SIDES
OF AN ORIGINAL (2-sided original)
This function is convenient when you wish to fax both sides of a document. The automatic document feeder will
automatically scan both sides of the document.
Fax
Mode Switch
Exposure
Image
Settings
Standard
Resolution
Memory TX
1
Direct TX
Auto 8 x11
Original
Auto Reception
Fax Memory:100%
(1)
Fax
Scan Size
Original
Auto 8 x11
2-Sided
Booklet
2-Sided
Tablet
(1)
2
To specify the image orientation...
Touch the appropriate original orientation key so that it is highlighted.
• Two-sided scanning automatically turns off after the transmission operation is completed.
• When the direct transmission mode is selected, two-sided scanning cannot be used.
Two-sided original
Auto
1 / 2
Special Modes
(2)
100% Send Size
1 / 2 Auto
Image Orientation
(2)
Transmission
Display the original settings screen.
Address Book
(1) Touch the [Image Settings] key.
Sub Address
Special Modes
(2) Touch the [Original] key.
File
Quick File
Select the 2-sided original setting.
OK
(1) Touch the [2-Sided Booklet] key or the
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
(3)
(2) Touch the appropriate [Image Orientation]
key.
If the wrong orientation is selected here, the image may
not be sent properly when using enlargement/reduction.
(3) Touch the [OK] key.
34
Front and back are
sent as two pages
Booklet
A J
C
L
Tablet
A B
E F
K L