Sending An Image; Basic Transmission Procedure - Sharp MX-NB10 Operation Manual

SENDING AN IMAGE

BASIC TRANSMISSION PROCEDURE

1
Make sure the machine is in scan
mode.
ON LINE
PRINT
DATA
SCAN
LINE
FAX
DATA
will appear prompting you to enter your account
number when you switch to scan mode. Enter your
account number (five digits) with the numeric keys.
(Page 19)
2
Place the original(s) in the document
feeder tray or on the document glass.
For detailed information on placing an original, see "4.
COPY FUNCTIONS" of the "Operation manual (for
general information and copier)".
If you are using the document glass to send multiple
pages, place the first page first.
You cannot place originals in both the
Note
document feeder tray and on the document
glass and send them in a single transmission.
3
Check the original size. If the original
is a non-standard size or the size was
not detected correctly, press the
[ORIGINAL SIZE] key.
AUTO% OUTPUT DUPLEX
FORMAT ORIGINAL SIZE DUPLEX SCAN
BROADCAST ORIGINAL SIZE DUPLEX SCAN
When the [ORIGINAL SIZE] key is pressed, the size
selection screen appears. See
THE SCANNING SIZE" (page 26)
4
If needed, select the color mode
27).
COPY EXPOSURE PAPER Z
SCAN COLOR MODE RESOLUTION AD
AD
FAX PROGRAM RESOLUTION
To adjust the color mode, press the [COLOR MODE]
key. (See "SELECTING THE COLOR MODE" (page
27).)
20
When the SCAN indicator is lit,
the machine is in scan mode.
If the indicator is not lit, press
the [SCAN] key. If auditing
mode has been enabled for
the scan function in the
system settings, a message
ORIGINAL SIZE
INCH
11x17
8 x14
1
2
8 x11 1
2
"MANUALLY SETTING
to set the original size.
(page
COLOR MODE
COLOR
GRAY
B/W
5
If needed, select the resolution setting
(page 27).
EXPOSURE PAPER ZOOM AU
COLOR MODE RESOLUTION ADDRESS FO
PROGRAM RESOLUTION ADDRESS BRO
The initial factory setting is [150dpi].
6
If needed, select the format
ZOOM AUTO% OUTPUT D
ON ADDRESS FORMAT ORIGINAL SIZE DU
ADDRESS DU
ON BROADCAST ORIGINAL SIZE
The initial factory setting is [PDF].
• Information on the destination can be
Note
stored in the Web page.
• The sender name is normally set to the
name stored in "Reply E-mail Address" in
"SMTP Setup" in the Web page.
7
Press the [ADDRESS] key.
E PAPER ZOOM AUTO% O
E RESOLUTION ADDRESS FORMAT ORIG
M RESOLUTION ADDRESS BROADCAST ORIG
RESOLUTION
100dpi
150dpi
200dpi
300dpi
(page 28).
FORMAT
PDF
PDF G3
MULTI
ALL PAGES 1FILE
DESTINATION SELECT
ADDRESS BOOK
ADDRESS ENTRY
ADDRESS SEARCH