Page 1
MODEL: MX-2300G MX-2700G MX-2300N MX-2700N DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM Safety Guide Safety Guide Safety Guide Before installing this product, be sure to read the "CAUTIONS" and "INSTALLATION REQUIREMENTS" sections. CAUTIONS INSTALLATION REQUIREMENTS SUPPLIES SPECIFICATIONS TO THE ADMINISTRATOR OF THE MACHINE Keep this manual close at hand for reference whenever needed.
Page 2
While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual.
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.
To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere. With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
INSTALLATION REQUIREMENTS Improper installation may damage this product. Please note the following during initial installation and whenever the machine is moved. 1. The machine should be installed near an accessible power outlet for easy connection. 2. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements.
Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, saddle stitch finisher staple cartridge, and transparency film.
Paper capacity: 500 sheets (80 g/m (21 lbs.)) Paper types: SHARP-recommended plain paper, recycled paper, and coloured paper Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR...
Page 9
(A3W and 12" x 18" paper can be output to right tray, finisher, or saddle stitch finisher) Output capacity: 500 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper) Output tray (Centre tray) (The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper.)
SPECIFICATIONS Continuous copying speeds* Model MX-2300G / MX-2300N MX-2700G / MX-2700N Copy ratio 100% / Reduced / Enlarged Colour copying Black and white Colour copying Black and white Copy mode copying copying A3, 11" x 17", 8K 12 copies/min. 12 copies/min. 14 copies/min.
Output method Face-down output Output capacity* 100 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper) When tray is folded up: 289 mm (W) x 405 mm (D) x 52 mm (H) (11-3/8" (W) x 15-61/64" (D) x 2-3/64" (H))
500 sheets (80 g/m (21 lbs.)) x 1 tray Paper types SHARP-recommended plain paper, recycled paper, and coloured paper When "Auto-AB" automatic detection is selected: Automatic paper size A3, B4, A4, A4R, B5, B5R, 216 mm x 330 mm (8-1/2" x 13") detection When "Auto-Inch"...
Paper capacity 3500 sheets (80 g/m (21 lbs.)) Paper types SHARP-recommended plain paper, recycled paper and coloured paper Power supply Supplied from the machine Dimensions 370 mm (W) x 550 mm (D) x 520 mm (H) (14-9/16" (W) x 21-21/32" (D) x 20-15/32" (H)) Weight Approx.
SPECIFICATIONS Finisher specifications Model MX-FNX1 A3W, A3, B4, A4, A4R, B5, B5R, A5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", Paper sizes 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR Thin paper (55 g/m to 59 g/m (15 lbs.
SPECIFICATIONS Saddle stitch finisher specifications* Model MX-FNX2 A3W, A3, B4, A4, A4R, B5, B5R, A5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", Paper sizes 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR Thin paper (55 g/m to 59 g/m (15 lbs.
SPECIFICATIONS Printer specifications Type Built-in Same as continuous copying speed (When printing same document continuously on A4 Continuous printing speed (8-1/2" x 11") plain paper in non-offset mode, excluding processing time.) Printing resolution 600 x 600 dpi / 1200 x 600 dpi* (black and white printing, rotating output not performed) Printer driver type SPLC-c...
SPECIFICATIONS Network scanner* / Internet fax* specifications Type Colour scanner 100 x 100, 200 x 200, 300 x 300, 400 x 400, 600 x 600 Scanning resolution (dpi) Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x 200 when file type is TIFF-S) Halftone can be selected for resolutions other than 200 x 100 dpi.
SPECIFICATIONS Optional equipment MX-2300G MX-2700G MX-2300N MX-2700N Document cover Reversing single pass feeder Standard Exit tray unit Stand/1x500 sheet paper drawer Stand/2x500 sheet paper drawer Large capacity tray Finisher Saddle stitch finisher Punch module Printer function Standard (SPLC-c), Yes (PCL, PS) Standard (PCL), Yes (PS) Network scanner function Standard...
Page 21
Information that the administrator of the machine requires is printed on the back of this page. (Separate this page from the manual and keep it in a safe place. In addition, fill in the name of the administrator and the administrator's contact information in the left hand margin.)
TO THE ADMINISTRATOR OF THE MACHINE (Separate this page from the manual and keep it in a safe place.) Factory default passwords When accessing the system settings, the administrator password is required to log in with administrator rights. The system settings can be configured in the Web pages as well as on the operation panel. To access the system settings using the Web pages, a password is also required.
Page 23
TO THE ADMINISTRATOR OF THE MACHINE This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
• PCL is a registered trademark of the Hewlett-Packard Company. • IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. • Sharpdesk is a trademark of Sharp Corporation. • All other trademarks and copyrights are the property of their respective owners.
Page 28
Safety Guide MODEL: MX-2300G MX-2700G MX-2300N MX-2700N PRINTED IN FRANCE TINSE3164GHZZ...