Basic Procedure For Scanning In Usb Memory Mode; Scanning To Usb Memory - Sharp MX-2300N User Manual

BASIC PROCEDURE FOR
4
SCANNING IN USB MEMORY
MODE

SCANNING TO USB MEMORY

Follow the steps below to send a scanned file to a commercially available USB memory device that has been connected
to the machine. This stores the file in the USB device.
• Consult your dealer or retailer for USB memory devices that can be used.
• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot
be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.
1
System Settings: USB-Device Check
This is used to check the connection of a USB device to the machine.
Connect the USB memory to the USB
connector (Type A) on the machine.
45