Using The Standard Windows Ps Printer Driver (Windows 98/Me/Nt 4.0) - Sharp MX-2300N User Manual

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
USING THE STANDARD WINDOWS PS PRINTER
DRIVER (Windows 98/Me/NT 4.0)
If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT 4.0 PS printer
driver, follow the steps below to install the PPD driver using the Add Printer Wizard.
• If you are using Windows 2000/XP/Server 2003, you can install the PPD driver from the installer.
• Be sure to view the Readme file (Readme.txt) before installing the PPD driver. The Readme file is in the [EnglishA] folder
on the "Software CD-ROM". For the location of the folder, see step 4.
1
Click the [Start] button, select
[Settings] and then click [Printers].
2
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 1" on the
front of the CD-ROM.
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
Installing the resident font information (Windows 98/Me)
If you have installed the PPD driver on Windows 98/Me and will be using the resident fonts in the machine, you must
install the resident font information. Follow the procedure below to install the resident font information.
• Before installing the resident font information, be sure to install the PPD driver.
• In the event that a resident font cannot be selected in a software application, install the resident font information again.
1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 1" on the
front of the CD-ROM.
2
Double-click [My Computer] (
then double-click the [CD-ROM] icon
( ).
22
4
Follow the on-screen instructions.
When you are asked to specify the path of the PPD file,
enter the path as follows.
Substitute the letter of your CD-ROM drive for "R" in the
following paths.
Operating system
Windows 98/Me
Windows NT 4.0
3
Double-click the [Drivers] folder, the
[Printer] folder, the [EnglishA] folder,
the [PPD] folder, the [9XME] folder, and
then [PFMSetup.exe].
) and
4
Follow the on-screen instructions.
After the resident font information has been installed,
restart your computer.
R:\Drivers\Printer
\EnglishA\PPD\9XME
R:\Drivers\Printer
\EnglishA\PPD\NT40
After installation, see "CONFIGURING THE PRINTER
DRIVER FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 23) to configure the printer driver
settings.
PPD file path