Sharp MX-2300N User Manual page 642

Original
X
X
Y
Y
Standard Size
Ready to scan for copy.
Full Color
Color Mode
Job Detail
4
Settings
Auto
Exposure
100%
Copy Ratio
STORING FREQUENTLY USED ORIGINAL SIZES
You can save special original sizes that you frequently use. This section explains how to store, call up, change, and
delete special original sizes.
Storing original sizes
Up to 9 special original sizes can be stored.
Ready to scan for copy.
Full Color
Color Mode
1
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
(2 1 / 2 17)
17
inch
1 / 2 5 / 8
(2 11 )
11
inch
Size Input
(2), (3) (1)
X 15
Manual
Y 8
1 / 2
Plain
8 x11 1 / 2
8 x11 1 / 2
1.
8 x11R 1 / 2
2.
8 x14 1 / 2
3.
11x17
4.
Original
8 x11 1 / 2
Plain
8 x11 1 / 2
8 x11 1 / 2
1.
8 x11R 1 / 2
2.
8 x14 1 / 2
3.
11x17
4.
● Specifying a non-standard original size
(1) Touch the [Size Input] tab.
(4)
(2) Enter the X (horizontal) dimension of the original.
OK OK
With the [X] key highlighted, enter the X (horizontal)
Auto
dimension of the original with the
the document glass is used, a dimension from 2-1/2" to
Manual
17" (64 mm to 432 mm) can be entered.
Custom
Size
When an automatic document feeder is installed, a dimension
from 5-1/2" to 17" (140 mm to 432 mm) can be entered.
If the length or width of the original is less than 5-1/2"
(140 mm), use the document glass.
(3) Enter the Y (vertical) dimension of the original.
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
glass is used, a dimension from 2-1/2" to 11-5/8" (64 mm
to 297 mm) can be entered.
When an automatic document feeder is installed, a dimension
from 5-1/8" to 11-5/8" (131 mm to 297 mm) can be entered.
If the length or width of the original is less than 5-1/8"
(131 mm), use the document glass.
(4) Touch the [OK] key.
When the [OK] key is touched, you will return to the job
detail setting screen. Touch the [Job Detail Settings] key
to return to the base screen of copy mode.
Verify that the correct original size is entered.
0
• Make sure that the entered numbers appear in the [Original]
2-Sided Copy
key. If the numbers are not correct, touch the [Original] key
Output
again and enter the correct numbers.
Special Modes
• If the correct numbers appear, touch the [Job Detail Settings]
File
key to return to the base screen of copy mode. The original
Quick File
size display in the base screen will show "Manual".
Touch the [Job Detail Settings] key.
0
2-Sided Copy
Output
Special Modes
File
Quick File
36
keys. When
keys. When the document