Sharp MX-2300N User Manual page 634

Copy Ratio
11x17 8 x11 1 / 2
64%
8 x11 1 / 2 5 x8 1 / 2 1 / 2
11x17 8 x14 1 / 2
77%
8 x14 1 / 2 8 x11 1 / 2
Auto Image
3
Copy Ratio
25% 50%
75% 150%
Auto Image
Keys marked (A)
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
Copy Ratio
11x17
8 x11 1 / 2
64%
8 x11 1 / 2 5 x8 1 / 2 1 / 2
11x17 8 x14
1 / 2
77%
8 x14 1 / 2 8 x11 1 / 2
Auto Image
4
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
• Touch the
/
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
Full Color
Auto
Color Mode
Original
Job Detail
5
Settings
Auto
Exposure
70%
Copy Ratio
100
%
Zoom
8 x14 1 / 2 11x17
11x17
8 x11 1 / 2
100%
5 x8 1 / 2 1 / 2 8 x11 1 / 2
Menu 1 2 XY Zoom
100
%
Zoom 200%
300%
100%
Menu 1 2 XY Zoom
(A)
70
%
Zoom
11x17
8 x14 1 / 2
8 x11 1 / 2 11x17
100%
5 x8 1 / 2 1 / 2 8 x11 1 / 2
Menu XY Zoom
1 2
key to increase the ratio, or the
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
(B)
2-Sided Copy
Auto 8 x11 1 / 2 1 / 2
Paper Select
Plain
8 x11 1 / 2
Special Modes
Special Modes
Quick File
Touch the [Menu] key to select copy
ratio menu "
● Menu
• Enlargement keys (2 ratios): 121%, 129%
OK
• Reduction keys (2 ratios): 64%, 77%
• Full size key: 100%
121%
129%
● Menu
• Enlargement keys (2 to 4 ratios)
OK
200%, 400%, any ratio (max. of two)
• Reduction keys (2 to 4 ratios)
400%
25%, 50%, any ratio (max. of two)
350%
• Full size key
100%
Touch a preset ratio key and zoom key
OK
to select the desired ratio and touch the
121%
[OK] key.
129%
After touching the [OK] key, make sure that a paper size
suitable for the ratio is selected.
key to decrease the ratio. (If you continue to touch the
Touch the [Job Detail Settings] key and
make sure that a suitable paper size is
selected for the ratio.
Output
If "Auto" appears in the [Paper Select] key (B), auto paper
selection is enabled. If auto paper selection is not enabled,
File
select the paper size manually.
28
" or " ".