Specifying The Send Size Of The - Sharp MX-2300N User Manual

SPECIFYING THE SEND SIZE OF THE ORIGINAL
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
Scan
Mode Switch
Exposure
Image
Settings
200X200dpi
Resolution
Send Settings
1
Auto 8 x11
Original
(1)
Scan
Scan Size
Original
Auto 8 x11
2
2-Sided
Booklet
2-Sided
Tablet
Scan
Original
Auto
5 x8
Manual
1 / 2
5 x8 R
8 x11 1 / 2
8 x11 1 / 2
3
• Size keys that cannot be specified for the send size are grayed out to prevent selection.
• To specify an AB size for the send size, touch the [AB
send size.
Scan
Scan Size
Original
Auto 8 x11
4
2-Sided
Booklet
2-Sided
Tablet
Auto
Mono2/Auto
Color Mode
PDF/PDF
File Format
1 / 2
Special Modes
(2)
100%
Send Size
1 / 2 Auto
Image Orientation
AB
Inch
1 / 2 1 / 2 1 / 2
8 x11R 11x17
1 / 2 1 / 2
8 x13(216x330)
8 x14 1 / 2 Long Size
(1)
129%
Send Size
1 / 2 11x17
Image Orientation
Display the original settings screen.
Address Book
(1) Touch the [Image Settings] key.
Address Entry
Special Modes
(2) Touch the [Original] key.
File
Quick File
Touch the [Send Size] key.
OK
Specify the send size.
OK
(1) Touch the desired send size key.
(2) Touch the [OK] key.
(2)
Inch] key to highlight the [AB] side and then specify the
Touch the [OK] key.
OK
The ratio used for reduction or enlargement of the original will
appear between the "Scan Size" and the "Send Size".
38