Sharp MX-2300N User Manual page 279

Specifying the size by entering numerical values.
When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size.
The width can be from 2-1/2" to 17" (64 mm to 432 mm), and the length can be from 2-1/2" to 11-5/8" (64 mm to 297 mm).
USB Mem. Scan
Mode Switch
Exposure
Image
Settings
200X200dpi
Resolution
File Name
1
Auto 8 x11
Original
(1)
USB Mem. Scan
Scan Size
Original
Auto 8 x11
2
2-Sided
Booklet
2-Sided
Tablet
USB Mem. Scan
Original
Auto
X
Manual
Manual
3
System Settings (Administrator): Original Size Detector Setting
This is used to set the size entry screen to "inch units" or "mm units".
USB Mem. Scan
Scan Size
Original
X17 Y11
4
2-Sided
Booklet
2-Sided
Tablet
• When the scan size is specified by numerical values, the send size cannot be specified.
• When the automatic document feeder is used, an original longer that 17" (432 mm) can be scanned (maximum length
31-1/2" (800 mm)). To scan a long original, touch the [Standard Size] tab in the screen of step 3 and then touch the [Long
Size] key.
☞
Specifying the size using paper sizes
Auto Mono2/Auto
Color Mode
PDF/PDF
File Format
Special Modes
1 / 2
Special Modes
(2)
100%
Send Size
1 / 2 Auto
Image Orientation
(2_1/2 17)
X 17
inch
Y
(2_1/2 11_5/8)
11
Y
inch
Size Input
Standard Size
(2), (3) (1)
Send Size
Auto
Image Orientation
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the
[Original] key.
Touch the [Scan Size] key.
OK
Enter the scan size.
OK
(1) Touch the [Size Input] tab.
(2) Touch the [X] key and enter the X
(horizontal) dimension with the
keys.
(4)
(3) Touch the [Y] key and enter the Y (vertical)
dimension with the
(4) Touch the [OK] key.
Touch the [OK] key.
OK
The specified size appears in the [Scan Size] key.
(page 55)
56
keys.