Sharp MX-2300N User Manual page 572

F-Code Memory Box / Relay Broadcast
Select address.
AAA AAA
CCC CCC
EEE EEE
Frequent Use ABCD
9
• To directly enter the fax number of an end receiving machine with the numeric keys, follow the steps below. Note
that if "Disable Direct
be possible.
(1) Touch the [Direct Entry] key.
(2) Enter fax number with the numeric keys.
(3) Touch the [OK] key.
• To check the addresses that have been entered, touch the [Address Review] key in the address selection screen.
To delete an end receiving machine, touch the key of the machine that you wish to delete and then touch the
[Release] key. When you have finished checking the end receiving machines, touch the [OK] key.
F-Code Memory Box / Relay Broadcast
Registration is completed.
No.001
Box Name
Relay Broadcast
Sub Address
000000/111111
Recipient
10 Addresses
10
To program another memory box...
Touch the [Next] key and repeat the procedure from step 5.
1/2 Direct Entry
BBB BBB
Address Review
DDD DDD
FFF FFF
0
EFGHI JKLMN OPQRST UVWXYZ
Sort Address
(1)
Entry" (page 188) is enabled in the system settings for fax (administrator), direct entry will not
Next
Specify the end receiving machines.
OK
(1) Touch the keys of the end receiving
machines.
The end receiving machines are entered in the order that
they are touched.
(2) Touch the [OK] key.
(2)
Touch the [Exit] key.
Exit
156