Sharp MX-2300N User Manual page 588

Disabling of Bypass Printing
This setting is used to disable bypass printing (printing
other jobs ahead of a job that has been stopped*
because the paper required for the job is not in any of
the trays).
To enable this setting, select the checkbox
touch the [OK] key.
* This does not include cases where the paper ran out
during the job.
Key Operation Setting
This setting determines how long a key in the touch
panel must be touched until the key input is registered.
The time can be set from 0 to 2 seconds in increments of
0.5 seconds.
By lengthening the time setting, key input can be
prevented when a key is touched accidentally. Keep in
mind, however, that when a longer setting is selected
more care is required when touching keys to ensure that
key input is registered.
Specify the time with the
[OK] key. (To make the number change quickly, keep
your finger on the or
To disable auto repeat of key input, select the [Disable
Auto Key Repeat] checkbox
The touch panel contains keys such as the zoom keys
(for setting the ratio) that can be touched continuously
to make a value change until it reaches a desired
value. This feature whereby a value changes
continuously while your finger is on the key is called
key repeat.
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date and
time.
To enable this setting, select the checkbox
touch the [OK] key.
and
keys and touch the
key.)
and touch the [OK] key.
and
Disabling of Covers/Inserts Mode
This setting is used to prohibit the use of the covers and
inserts function.
To enable this setting, select the checkbox
touch the [OK] key.
This setting is not used in fax mode.
Customize Key Setting
Short-cuts to functions that are frequently used can be
displayed as keys in the lower right corner of the base
screen of each mode.
1
Touch the key of the mode for which you
wish to configure customized keys.
System Settings
Customize Key Setting
Internet Fax
USB Memory Scan
2
Touch the key that you wish to configure.
To return all of the customized key settings to the factory
default settings, touch the [Back to Default] key.
System Settings
Customize Key Setting
Fax
Customize 1
Special Modes
3
Touch the [Setup Items] key.
If you do not want the selected customized key to appear
in the base screen, select the [No Display] checkbox
System Settings
Customize Key Setting
Fax/Customize 2
Setup Items
Key Name
No Display
172
Copy Scan
Fax
Data Entry
Customize 2 Customize 3
File Quick File
Back to Default
Cancel
File
File
and
OK
OK
.
OK