Ping; Figure 121 Show Mac Address-Table Command Example; Figure 122 Ping Command Example - ZyXEL Communications GS-3012F User Manual

GS-3012/GS-3012F User's Guide

Figure 121 show mac address-table Command Example

ras# show mac address-table static
Port
CPU
ras#

31.3 ping

Syntax:
where
<ip>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ size <0-8024> ]
[ -t ]
This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
192.168.1.100.

Figure 122 ping Command Example

ras# ping 192.168.1.100
sent rcvd
1
2
3
ras#
197
VLAN ID MAC Address
1 00:a0:c5:01:23:46
ping <ip> < [in-band|out-of-band|vlan <vlan-id> ] [ size <0-
8024> ] [ -t ]>
= The IP address of an Ethernet device.
= Specifies the network interface or the VLAN ID to which
the Ethernet device belongs.
out-of-band
band
= Specifies the packet size to send.
= Sends Ping packets to the Ethernet device indefinitely.
Click
rate rtt avg
1 100 0
2 100 0
3 100 0
Type
Static
refers the management port while
means the other ports on the switch.
to terminate the Ping process.
[CTRL]+ C
mdev max
0 0 0
0 0 0
0 0 0
Chapter 31 Command Examples
in-
min reply from
0 192.168.1.100
0 192.168.1.100
0 192.168.1.100