Table of Contents
Advertisement
Other Commands
Function
Code
Hex
Remarks
Cancel last line & Initialize printer immediately
<CAN>
18
1. This cancels the data in data buffer and the line buffer
and initializes commands that have already been set.
2. The following commands are not affected.
a. Settings selecting the printer (DC1).
b. Settings deselecting the printer (DC3).
c. Settings of the pulse width of the drive of the
peripheral devices. (ESC BEL n1 n2).
3. This code is processed in real-time upon its reception
from the host. (direct decode.)
4. If this code is received when the error can be reset,
the printer automatically resets to On-line. (However,
this is only when the cause of the error has been
removed.)
5. If this command is received while printing, the data
and line buffers are cleared when the line of printing
has been completed.
6. Setting values for enabling and disabling the Panel
Switches (ESC e n) are not initialized.
7. If the printer has been deselected by DC3, it will not
reset to On-line.
8. Data received after the CAN code is not cleared.
– 54 –
Advertisement
Table of Contents
