Function
Code
Hex
Remarks
d. Settings for selecting the printer (DC1).
e. Settings for deselecting the printer (DC3).
3. The printer is initialized after printing the data in the
line buffer and feeding 1 line of paper.
Enquiry (Status inquiry)
<ENQ>
05
1. When On-line, the printer sends the status information
to the host.
2. When Off-line, only the following status information is
sent to the host.
a. Mechanical errors
b. Out of paper errors
3. The following shows the types of status errors.
Bit
Error
0
Parity Error
1
Framing Error
2
Mechanical Error
3
Out of Paper Error No Error
4
5
Buffer Empty
6
Buffer Overflow
7
Conversion Switch High (SW: OFF)
No Error
No Error
No Error
Always Set to "0"
– 56 –
"0"
Error
Error
Error
Error
Empty
Overflow
Low (SW: ON)
"1"