Table of Contents
Advertisement
Function
Code
Hex
Initial Value
Remarks
Function
Code
Hex
Initial Value
Remarks
Set vertical tab stops
<ESC> "B" n1 n2 ... <0>
1B 42 n1 n2 ... 00
Clear
Cancels preset vertical tabs and sets new vertical tab
stops at lines n 1 to n k using the current line pitch based
on the top of the page.
Sets tab positions in rising order of size and stops set-
tings when n is 0 or below the previous value.
A maximum of 16 vertical stops can be set.
ESC B NULL rests all horizontal tab positions.
1. When the tab position setting nk is equivalent to the
previous set position nk-1 or is smaller, the vertical tab
setting is considered to be complete.
2. Tab positions are set and do not move even if the line
pitch and bottom margin are changed after making the
settings.
3. When k >16, or when it is nk is less than or equal to
nk-1, data up to the NULL code is ignored.
Set horizontal tab stops
<ESC> "D" n1 n2 ... <0>
1B 44 n1 n2 ... 00
Cancel
Cancels preset vertical tabs and sets new horizontal tab
stops at lines n 1 to n k using the current line pitch based
on the top of the page.
Line pitches including the spaces between characters
and magnified settings are valid.
Sets tab positions in rising order of size and stops set-
tings when n is 0 or below the previous value.
– 30 –
Advertisement
Table of Contents
